Comment Only

05/15/2020

Wall framing approved see outstanding comments for corrections.

Carried Forward

05/15/2020

Hole in concrete floor by shaft to be patched with an approved firestop, and hole in shaft at same location as floor hole to also be patched d and rated for 2hr. Rating. Call for the inspection of these repairs.

Resolved

05/28/2020

Hole in concrete floor by shaft to be patched with an approved firestop, and hole in shaft at same location as floor hole to also be patched d and rated for 2hr. Rating. Call for the inspection of these repairs.

Comment Only

05/28/2020

Above ceiling approved, with firestops to be completed and viewed at 3locations.

Outstanding

05/28/2020

Firestops to be completed at three locations, and removal of form boards at concrete.

Comment Only

08/06/2020

Board room is not going to be used as a 7 sq. Ft. Standing room occupant load. It is set up to have a use of under 50 occupancy load and will not need exit signage or panic/ push bar door hardware. This room is compliant as it is set up and approved for use. The space is also compliant for use, and meets code requirements.

Comment Only

08/06/2020

Board room is not going to be used as a 7 sq. Ft. Standing room occupant load. It is set up to have a use of under 50 occupancy load and will not need exit signage or panic/ push bar door hardware. This room is compliant as it is set up and approved for use. The space is also compliant for use, and meets code requirements. The project manager is to contact the architect and have them send an addendum for the use and occupant load of this room to the city for our record of change and use of this room. This is a condition to be met to final this permit.