Permit Application Status

PRCRF202603406


You will only be able to view fees or view conditions if you are a contact on the permit application.

Note: You can collapse and expand individual sections by clicking the header of the section you wish to collapse/expand.

Summary

PRCRF202603406
Roof, Commercial
Permit(s) Issued
MATTHEWS, RICHARD K TRUST
Alteration/Repair/Replace
Re-roof of North section of the building area (approximately 8,900 sq. ft with walls). Remove existing asphalt and gravel. Add a new 1/8" per foot tapered iso insulation to meet or exceed current "R" code of 30 and mechanically fasten as per code. Install new 60 mil. adhered EPDM roof system as per manufacturers specifications. Seam all EPDM, install perimeter RPS anchored into block walls / perimeter wood blocking 12" on center, Flash-in interior roof drains / scuppers as per manufacturers specifications. Install new 22 Ga. galvanized metal and 3/4' plywood over any decking cutouts of unused roof penetrations. Apply new EPDM up all interior perimeter parapet walls and remove existing fascia metal, install new wood perimeter wood blocking as required for new insulation heights. Fabricate and install new 24 guage metal stack bases to all existing flue's. Fabricate and install new perimeter fascia metal 24 gauge standard color pre-finished metal. Clean up all membrane related debris and place in dumpster onsite. Must have area for roll-off dumpster next to the building and crane access.
04/02/2026
04/10/2026
10/20/2026

Locations

Permits

Permit Number: PRCRF202603406

Roofing
Issued
04/10/2026
10/20/2026

Deposits & Bonds

There are no deposits or bonds for this permit application.

Inspections

Inspection Outcome Requested Scheduled Date Complete
Building Final Inspection Pending
Progress Inspection Passed 4/20/2026 (12:30 - 2:30) 4/20/2026 (PM) 04/20/2026
Talked to contractor on site looked at photos of insulation and slope- Approved
Corrections:


Miscellaneous/Other
Comment Only
04/20/2026
Talked to contractor on site looked at photos of insulation and slope- Approved