Permit Application Status

PREL201813981

Note: You can collapse and expand individual sections by clicking the header of the section you wish to collapse/expand.

Summary

Application Number:

PREL201813981

Application Type:

Electrical

Application Status:

Expired

Property Owner's Full Name:

THERMO KING CORPORATION

Category of Work:

Repair/Replace

Description of Work:

4th quarter maintenance

Application Date:

11/07/2018

Issued Date:

11/13/2018

Expiration Date:

07/13/2019

Locations

Locations:

Property
1002724230015

Address
314 W 90TH ST, BLOOMINGTON, MN 55420

Permits

Permit Number: PREL201813981

Permit Type:

Electrical

Permit Status:

Expired

Date Issued:

11/13/2018

Expiration Date:

07/13/2019

Deposits & Bonds

There are no deposits or bonds for this permit application.

Inspections

Inspection	Outcome	Requested	Scheduled	Date Complete
Annual/Qtrly Inspection	Pending
Corrections: Correction 1: Miscellaneous/Other Status: Outstanding Date Status Changed: 01/14/2019 Comments: New CNC laser cutter will need to have third party evaluation completed.
Annual/Qtrly Inspection	Partial Pass	11/27/2018 (8:00 - 10:00)	11/27/2018 (AM)	11/27/2018
Corrections: Correction 1: Miscellaneous/Other Status: Comment Only Date Status Changed: 11/27/2018 Comments: Above ceiling office area- ok RI walls in lower shower rms- ok Cooling tower - ok Final for boiler rm - ok
Annual/Qtrly Inspection	Partial Pass	12/7/2018 (8:00 - 10:00)	12/7/2018 (AM)	12/07/2018
Corrections: Correction 1: Miscellaneous/Other Status: Carried Forward Date Status Changed: 12/07/2018 Comments: New CNC laser cutter will need to have third party evaluation completed.
Correction 2: Miscellaneous/Other Status: Carried Forward Date Status Changed: 12/07/2018 Comments: 480 isolation transformer needs to be bonded on secondary side. Or needs to be completed per NEC 250.21B
Annual/Qtrly Inspection	Partial Pass	1/14/2019 (10:00 - 12:00)	1/14/2019 (AM)	01/14/2019
Corrections: Correction 1: Miscellaneous/Other Status: Carried Forward Date Status Changed: 01/14/2019 Comments: New CNC laser cutter will need to have third party evaluation completed.
Correction 2: Miscellaneous/Other Status: Resolved Date Status Changed: 01/14/2019 Comments: 480 isolation transformer needs to be bonded on secondary side. Or needs to be completed per NEC 250.21B
Correction 3: Miscellaneous/Other Status: Comment Only Date Status Changed: 01/14/2019 Comments: Bathrooms in lower level finaled.