Permit Application Status

PREL201914593


You will only be able to view fees or view conditions if you are a contact on the permit application.

Note: You can collapse and expand individual sections by clicking the header of the section you wish to collapse/expand.

Summary

PREL201914593
Electrical
Finaled
Nick Mauk
Alteration/Repair/Replace
JOB 83615-1088 DYSC UPS/ASML PANEL POWER PROTECTION DEVICE (UPPER Mechanical Level) P3 ASML Panel (2BB15H1) Power Protection Device Installation In P3 Upper Mechanical Level, place equipment and modify circuit’s runs as noted: • Place Allen Bradley DySC Dynamic Voltage Sag Corrector on supplied pad. • Disconnect feed from 480V-400/231Y transformer which feeds panelboard 2BB15H1, demo back (2) 2” conduits which contain 3/0 wire back approximately 8 feet, mount 24” x 24” splice box, re-pipe to transformer. • Pipe from splice box approximately 40’ with two (2) pairs of two (2) 2” conduits to new Allen Bradly DySC Dynamic Voltage Sag Corrector and back to the splice box. • Re feed and make splices for feed to AB DySC and output of DySC back to Transformer. • Make all connections on AB DySC system per manufacturer’s recommendations.
12/04/2019
12/06/2019
01/12/2021
07/16/2020

Locations

Permits

Permit Number: PREL201914593

Electrical
Finaled
12/06/2019
01/12/2021

Deposits & Bonds

There are no deposits or bonds for this permit application.

Inspections

Inspection Outcome Requested Scheduled Date Complete
Electrical Rough-in Inspection Passed 12/30/2019 (12:30 - 2:30) 12/30/2019 (PM) 12/30/2019
Electrical Final Inspection Passed 7/16/2020 (8:00 - 10:00) 7/16/2020 (AM) 07/16/2020
Corrections:


Miscellaneous/Other
Comment Only
07/16/2020
Final OK - verbal- verify lockable means for transformer primary. Must be lockable in the off position.