Online service center | City of Bloomington MN Permit Application Status

try again

Permit Application Status

PREL202116806

You will only be able to view fees or view conditions if you are a contact on the permit application.

Note: You can collapse and expand individual sections by clicking the header of the section you wish to collapse/expand.

Application Number:

PREL202116806

Application Type:

Electrical

Application Status:

Finaled

Property Owner's Full Name:

JBC BLOOMINGTON LLC

Category of Work:

Alteration/Repair/Replace

Description of Work:

Disconnect old furnace & reconnect new furnace

Application Date:

12/29/2021

Issued Date:

01/28/2022

Expiration Date:

01/11/2023

Date Finaled:

07/15/2022

Locations:

Property
0202724130038

Address
8028 BLOOMINGTON AVE S, BLOOMINGTON, MN 55425

Permit Type:

Electrical

Permit Status:

Finaled

Date Issued:

01/28/2022

Expiration Date:

01/11/2023

There are no deposits or bonds for this permit application.

Inspection	Outcome	Requested	Scheduled	Date Complete
Electrical Final Inspection	Failed	2/2/2022 (10:00 - 12:00)	2/2/2022 (AM)	02/02/2022
Corrections: Correction 1: Ground/bond all metal boxes or metal enclosures- use 10/32 ground screw, ground clip or self-tapping machine screw ( tek-screw ) that engages not less Status: Carried Forward Date Status Changed: 02/02/2022 Comments: Ground/bond all metal boxes or metal enclosures- use 10/32 ground screw, ground clip or self-tapping machine screw ( tek-screw ) that engages not less than two threads in the box or enclosure Improper connection at furnace disconnect switch box- OK to email photos of repair to: tmiller@bloomingtonmn.gov
Electrical Final Inspection	Passed	7/15/2022 (10:00 - 12:00)	7/15/2022 (AM)	07/15/2022
Corrections: Correction 1: Ground/bond all metal boxes or metal enclosures- use 10/32 ground screw, ground clip or self-tapping machine screw ( tek-screw ) that engages not less Status: Resolved Date Status Changed: 07/15/2022 Comments: Ground/bond all metal boxes or metal enclosures- use 10/32 ground screw, ground clip or self-tapping machine screw ( tek-screw ) that engages not less than two threads in the box or enclosure Improper connection at furnace disconnect switch box- OK to email photos of repair to: tmiller@bloomingtonmn.gov