Permit Application Status

PRMH201809937

Note: You can collapse and expand individual sections by clicking the header of the section you wish to collapse/expand.

Summary

Application Number:

PRMH201809937

Application Type:

Mechanical/HVAC

Application Status:

Expired

Property Owner's Full Name:

101 AMERICAN BLVD W LLC

Category of Work:

Alteration/Repair/Replace

Description of Work:

Rooftop Units, Exhaust Fans, Electric Unit Heaters, Ductwork, Dampers

Application Date:

08/28/2018

Issued Date:

07/12/2019

Expiration Date:

06/03/2020

Locations

Locations:

Property
0302724210015

Address
101 AMERICAN BLVD W, BLOOMINGTON, MN 55420

Permits

Permit Number: PRMH201809937

Permit Type:

Mechanical

Permit Status:

Expired

Date Issued:

07/12/2019

Expiration Date:

06/03/2020

Deposits & Bonds

There are no deposits or bonds for this permit application.

Inspections

Inspection	Outcome	Requested	Scheduled	Date Complete
Mechanical Rough-in Inspection	Partial Pass	10/11/2019 (8:00 - 10:00)	10/11/2019 (AM)	10/11/2019
Mechanical Rough-in Inspection	Partial Pass	10/15/2019 (8:00 - 10:00)	10/15/2019 (AM)	10/15/2019
Mechanical Rough-in Inspection	Partial Pass	10/18/2019 (10:00 - 12:00)	10/18/2019 (AM)	10/18/2019
Corrections: Correction 1: Miscellaneous/Other Status: Comment Only Date Status Changed: 10/18/2019 Comments: Gas pressure test ok
Mechanical Rough-in Inspection	Failed	10/22/2019 (10:00 - 12:00)	10/22/2019 (AM)	10/22/2019
Mechanical Rough-in Inspection	Failed	10/25/2019 (10:00 - 12:00)	10/25/2019 (AM)	10/25/2019
Mechanical Rough-in Inspection	Passed	10/29/2019 (10:00 - 12:00)	10/29/2019 (AM)	10/29/2019
Mechanical Rough-in Inspection	Partial Pass	11/6/2019 (12:30 - 2:30)	11/6/2019 (PM)	11/06/2019
Corrections: Correction 1: Miscellaneous/Other Status: Carried Forward Date Status Changed: 11/08/2019 Comments: Fire angles installed at each job location at floor to be addressed. The angles that are in place do not cover the floor opening.Fire caulk at corners where angles meet, and any openings of electrical work angles are cut out.
Correction 2: Miscellaneous/Other Status: Comment Only Date Status Changed: 11/06/2019 Comments: Fuse-a-ble dampers at each floor duct location approved. See “outstanding” comment for correction.
Mechanical Rough-in Inspection	Failed	11/8/2019 (10:00 - 12:00)	11/8/2019 (AM)	11/08/2019
Mechanical Final Inspection	Partial Pass	11/13/2019 (8:00 - 10:00)	11/13/2019 (AM)	11/13/2019
Corrections: Correction 1: Miscellaneous/Other Status: Carried Forward Date Status Changed: 11/13/2019 Comments: Fire angles installed at each job location at floor to be addressed. The angles that are in place do not cover the floor opening.Fire caulk at corners where angles meet, and any openings of electrical work angles are cut out.
Mechanical Final Inspection	Passed	12/2/2019 (10:00 - 12:00)	12/2/2019 (AM)	12/02/2019
Mechanical Final Inspection	Passed	12/6/2019 (10:00 - 12:00)	12/6/2019 (AM)	12/06/2019
Corrections: Correction 1: Miscellaneous/Other Status: Outstanding Date Status Changed: 11/13/2019 Comments: Fire angles installed at each job location at floor to be addressed. The angles that are in place do not cover the floor opening.Fire caulk at corners where angles meet, and any openings of electrical work angles are cut out.