Online service center | City of Bloomington MN Permit Application Status

try again

Permit Application Status

PRPK202506944

You will only be able to view fees or view conditions if you are a contact on the permit application.

Note: You can collapse and expand individual sections by clicking the header of the section you wish to collapse/expand.

Application Number:

PRPK202506944

Application Type:

Parking Lot

Application Status:

Finaled

Property Owner's Full Name:

T AND T OF MN INC

Category of Work:

Alteration/Repair/Replace

Occupancy Code:

Not Required

Description of Work:

Striping parking lot.

Application Date:

06/18/2025

Issued Date:

08/18/2025

Expiration Date:

04/14/2026

Date Finaled:

10/16/2025

Locations:

Property
1002724220013

Address
8610 HARRIET AVE S, BLOOMINGTON, MN 55420

Permit Type:

Parking Lot

Permit Status:

Finaled

Date Issued:

08/18/2025

Expiration Date:

04/14/2026

There are no deposits or bonds for this permit application.

Inspection	Outcome	Requested	Scheduled	Date Complete
Building Final Inspection	Failed	8/21/2025 (10:00 - 12:00)	8/21/2025 (AM)	08/21/2025
Corrections: Correction 1: Miscellaneous/Other Status: Carried Forward Date Status Changed: 08/21/2025 Comments: Parking lot and stripping is fine. Signage to spaces is not install as required. Corrections.... 1) install handicapp signage for parking stall and signage for the unloading stall. Unloading stall signage to read... " unloading Zone" / " No Parking". Signs will need to be mounted on building and on fence, sign heights need to be installed and measured , between 60-66 inches from bottom of sign to grade. Call for reinspection when the signs are installed.
Building Final Inspection	Passed	10/16/2025 (8:00 - 10:00)	10/16/2025 (AM)	10/16/2025
Corrections: Correction 1: Miscellaneous/Other Status: Resolved Date Status Changed: 10/16/2025 Comments: Parking lot and stripping is fine. Signage to spaces is not install as required. Corrections.... 1) install handicapp signage for parking stall and signage for the unloading stall. Unloading stall signage to read... " unloading Zone" / " No Parking". Signs will need to be mounted on building and on fence, sign heights need to be installed and measured , between 60-66 inches from bottom of sign to grade. Call for reinspection when the signs are installed.